Main keyboard keys

Android Back key

Android Home key

Android Overview key

App Menu:  App-specific, this launches the menu for the active app; it performs the same function as the menu key that most apps have (giving options for help, about, exit, etc.). For 3rd party apps it may not do anything.

Function keys F1-F12

These can be configured in the Trimble software according to your requirements. Refer to the Trimble software documentation.

Numeric Keypad, Numeric Keypad Enter key, and Cursor Lock / Num Lock key:

• The Numeric Keypad is locked to Num Lock by default; the 0 to 9, decimal point (‘.’) and minus (‘-’) keys perform the same as the numeric keyboard on a standard PC keyboard.

• The Numeric Keypad Enter key performs the same as the numeric keyboard Enter key on a standard PC keyboard.

• Cursor Lock / Num Lock key. By default, the numeric keypad is locked in Num Lock (the LED status icon below the key is OFF).

  To turn off Num lock and turn on Cursor lock, press-hold the yellow Fn key and press the . key (the decimal point) to change the numeric keypad to a Cursor Navigation state. In Cursor Navigation state, the keys function according to the "key+Shift" behavior (Home; End; Page up; Page Down; left, right, up, or down arrow; Insert; and Delete.)

  When in Cursor Navigation state, the LED status icon below the key is ON (green).

Master Volume keys:  Use to adjust the device's speaker volume.

• Fn+8 = Volume up

• Fn+5 = Volume down.

Print Screen (Fn+0). Capture a screenshot of what is currently visible on the screen.

Screenshots are saved to the Files / Images / Screenshots folder and can also be accessed under Photos / Screenshots.

You can also Print Screen by holding down the Power key and tapping Screenshot.

Modifier Keys: Fn, Shift , Ctrl, and AGr

The Search key () is used as a non-modifier key to open the Android Search function. You can make it non-sticky by turning this option Off. See Modifier keys and Sticky keys: modes and settings for more information.

The modifier keys are keys that modify the action taken when other keys are pressed while the modifier key is held down. Modifier keys can be used in combinations with more than one key pressed at the same time.

To make the keyboard easier to use the modifier keys can be configured as sticky keys. When sticky keys are enabled the modifier keys “stick down” when pressed so that you do not need to press-hold a modifier key while you press the other key. See Modifier keys and Sticky keys: modes and settings for m for more information.

Fn Key (Function Select key). Use the Fn key to access a key's alternate function, as printed above the key.

• If sticky keys are not enabled, press-hold the Fn key and press the other required key.

• If sticky keys are enabled you do not need to hold the Fn key while pressing the other key.

  See Modifier keys and Sticky keys: modes and settings for m for more information.

Caps Lock = Fn+Z: locks the keyboard alphabetic keys to capital letters.

Power key. Turn the screen on / off. Press-hold the Power key for a couple of seconds to quickly access settings to power off or restart the device, capture a screenshot or place the device into Shelf mode (see Using Shelf mode).

Screen Lock = Fn+1. Use to temporarily disable the touchscreen to clean the display. Press any key to unlock the touchscreen.

In this mode the Notification bar is still accessible.

Screen Display Brightness: Adjust the display's backlight brightness:

• Fn+7 = brighter

• Fn+4 = dimmer

You can also set the display brightness to adjust automatically when the ambient lighting conditions change. See Display settings: adjusting the backlight.