Charging the internal batteries and the optional Li-35 accessory battery pack while installed in the Ranger 5 data collector

The internal batteries are charged using the USB-C port directly on the bottom of the device. If you have the Li-35 accessory battery pack installed, it is also charged through the USB‑C port.

1. Connect the appropriate international plug adapter for your region to the AC adapter.

2. Connect one end of the USB-C to USB-C cable to the USB-C port located on the AC adaptor.

3. Connect the other end of the USB-C cable to the USB-C port on the Ranger 5 data collector.

4. Plug the power supply into an electrical outlet.

   

The internal Ranger 5 data collector batteries will charge first. When the internal batteries are fully charged, the optional Li-35 accessory battery pack, if installed, will charge.

It may take longer to charge the batteries if you are using your device for power-intensive activities, for example using GNSS or processing a lot of data while you are charging it. For details on other charging options and charge time for the accessory battery pack, see Charging the removable accessory battery pack separately from the Ranger 5 data collector.